Screws straight into your ice bath's water inlet or outlet to give you a quick-release hose pipe connection - for filling, draining, or hooking up a chiller. No valve, just a simple connector.
Screws onto your ice bath's water inlet or outlet and gives you a quick-release hose pipe connection - straight through, no on/off lever. Just a solid, leak-free way to get a hose onto your ice bath.
A quick-release hose connector on one end, a 1/2" BSP male thread for your ice bath on the other - everything you need to get a hose pipe, tap or chiller connected up.
The ice-bath-facing end has a 1/2" BSP male thread, designed to screw straight into the female connector already fitted to your ice bath's water inlet or outlet. We recommend using PTFE tape around the threaded end or a suitable washer to ensure a water-tight connection (not supplied). Hand-tighten the threaded end only - over-tightening with tools can crack or snap the thread.
Ice baths typically use 1/2" male or female connections - this connector is suitable for ice baths with a female connection. Connect to the ice bath's own water inlet or outlet, the connector just screws straight onto it. Not suitable if your ice bath has a male connector.
The outer end takes a standard quick-release, push-and-click hose connector - the same style of fitting used on garden hoses and many chillers - so you can attach or disconnect a hose or chiller in seconds, no tools needed.
Many popup and inflatable ice baths (such as Lumi, Myo and similar) come with a small white ball valve for draining, fitted as standard with a short flexible plastic tube - too short to reach a hose pipe, a drain, or the best spot to empty into. This connector screws straight onto that valve, swapping the short tube for a proper quick-release hose connection so you can run a hose wherever you need it to go.
Screws onto your ice bath's 1/2" BSP water inlet connector, giving you a quick-release hose connection ready for filling, or for hooking up a chiller with a hose fitting.
Screws onto your ice bath's 1/2" BSP water outlet connector, giving you a quick-release hose connection ready for draining straight to a hose, a drain, or the best spot to empty into.
Attach a hose pipe for quick, easy filling - handy for topping up between sessions or filling from a tap some distance away. Many modern chillers use hose connectors too, so you can connect yours straight up and leave it.
Attach a hose for quick, easy draining - no more lifting or tipping the whole bath to empty it. Perfect for draining your ice bath if it's used indoors and you need a hose to get the water where it needs to go. Also handy if your chiller drains via a hose connection.
41mm (1.6in) long. The 1/2" BSP male thread end is 20mm (0.7in) across with a 15mm (0.5in) internal diameter; the hose nipple end is 15.25mm (0.6in) across with an 8mm (0.3in) internal diameter.